When an ice maker stops filling, a worn valve is often the culprit. Choosing the right replacement can restore steady ice production without replacing the whole appliance.
This roundup focuses on compatibility, build quality, and value so you can find a valve that matches your refrigerator and solves the problem fast.
Best 10 Ice Maker Replacement Valves Picks for 2026
GE-Compatible Water Inlet Repair
Parts Master 175D4638P005 Valve
- Direct replacement for WR57X10033 and similar GE parts
- Regulates water to the ice maker and dispenser
- NSF/ANSI listed with a 1-year limited warranty
Best For: GE and Hotpoint refrigerators needing a direct inlet-valve replacement
Frigidaire Fit Valve
242252603 Ice Maker Water Valve
- Compatible with 242252603 and several older part numbers
- Runs on 120V, 35W with 1/4-inch fittings
- Includes a 2-year warranty
Best For: Frigidaire/Kenmore refrigerators needing a 242252603-style replacement
GE Hotpoint Quick-Connect Valve
- Fits many WR57X10033-related part numbers
- Supplies water to ice maker and dispenser
- Includes guard plus CSA/NSF/UL listings
Best For: DIY repairs on GE/Hotpoint/Kenmore refrigerators with WR57X10033-style valves
Commercial Ice Machine Valve
- Built for 110V-127V AC commercial ice machines
- Includes threaded inlet, outlet tube, and metal bracket
- May help fix no-fill, slow-fill, or leaking issues
Best For: Commercial or countertop ice makers using an FCD180G-style valve
GE/Hotpoint/Kenmore Compatible
WR57X10033 Ice Maker Inlet Valve
- Fits many WR57X-style replacement numbers
- 1/4-inch inlet with quick-connect outlet
- Fixes leaks, no-water, and freezing issues
Best For: Replacing a GE/Hotpoint/Kenmore icemaker inlet valve
Electrolux/Frigidaire Match
242252603 Ice Maker Water Valve
- Metal replacement for 242252603-style valves
- 120V, 35W with standard 1/4-inch connections
- Helps solve poor flow, leakage, and ice issues
Best For: Owners of compatible Frigidaire, Electrolux, or Kenmore refrigerators
Whirlpool Family Upgrade
WPW10498976 Ice Maker Solenoid Valve
- Fits Whirlpool, Kenmore, and Maytag replacements
- 1/4-inch compression inlet and push-on outlet
- Designed to reduce seepage and stabilize flow
Best For: Cross-compatible Whirlpool-family fridge repairs
Reliable Fit Option
242252603 Ice Maker Valve for Frigidaire/Kenmore
- Fits many Frigidaire and Kenmore models
- Includes bracket and push-connect outlet
- Corrosion-resistant metal and plastic build
Best For: Compatible refrigerator owners wanting a dependable replacement
Upgraded Seal Design
242252603 Ice Maker Solenoid Valve
- Upgraded push-fit connector helps limit leaks
- 2-year warranty included
- Matches many common Frigidaire/Kenmore part numbers
Best For: Buyers wanting a leak-resistant upgraded replacement
Model-Match Replacement
242252603 Valve for Frigidaire/Electrolux
- Broad part-number compatibility list
- 1/4-inch compression and push-in connections
- One-year warranty with leak-focused sealing
Best For: Model-matched replacements for Frigidaire and Electrolux fridges
GE-Compatible Water Inlet Repair – Parts Master 175D4638P005 Valve
If you need ice maker replacement valves for a GE or Hotpoint refrigerator, this Parts Master water inlet valve is built as a direct replacement for several common part numbers. It is designed to regulate water flow to the ice maker and dispenser, making it a practical fix for leaks, weak fill issues, or a valve that won’t open.
Best For: GE and Hotpoint refrigerator owners replacing a failed inlet valve with a direct-fit part.
Pros:
- Direct replacement for many GE-compatible part numbers, including WR57X10033 and WR57X110
- Controls water flow to both the ice maker and dispenser
- Made with a metal body and NSF/ANSI compliance listed
- Backed by a 1-year limited warranty
Cons:
- Compatibility is model-specific, so matching the part number matters
- Only includes a single valve assembly
Overall, this is a straightforward replacement choice when your refrigerator needs a compatible valve to restore normal water delivery. Its long replacement-part list and direct-fit positioning make it especially useful for common GE-family repairs.
Frigidaire Fit Valve – 242252603 Ice Maker Water Valve
For Frigidaire-family ice maker replacement valves, this 242252603 assembly is aimed at refrigerators that use a 120V, 35W solenoid valve with a 1/4-inch compression inlet and push-connect outlet. It is positioned as a replacement for several older part numbers, so it can be a useful option when the original valve is no longer filling correctly.
Best For: Frigidaire and Kenmore refrigerator owners who need a compatible 242252603-style valve.
Pros:
- Compatible with 242252603 and several replacement part numbers
- Built for 120V, 35W operation
- Uses a 1/4-inch compression inlet and push-connect outlet
- Includes a 2-year warranty
Cons:
- Fit depends on matching the original valve and model
- Installation requires shutting off power and water first
This valve makes sense if you are replacing a worn Frigidaire water inlet valve and want a part that aligns with common connector and voltage specs. Its broad model list and long warranty are the main reasons it stands out.
GE Hotpoint Quick-Connect Valve – Techecook WR57X10033 Guarded
This Techecook option is a practical pick when you are shopping for ice maker replacement valves for GE, Hotpoint, or Kenmore refrigerators. The WR57X10033-style assembly is designed to supply water to both the ice maker and dispenser, and it includes the newer quick-connect outlet format described in the notes.
Best For: DIY refrigerator repairs where a WR57X10033-style quick-connect valve is needed.
Pros:
- Compatible with many WR57X10033-related replacement part numbers
- Designed to supply water to the ice maker and water dispenser
- Includes a guard and uses 1/4-inch compression fittings
- Lists CSA, NSF, and UL compliance
Cons:
- Requires careful matching of the original valve and model
- The quick-connect setup may require cutting the retaining nut from the old line
Because it targets a widely used GE-style configuration, this valve is a sensible replacement when the existing part is leaking, not opening, or causing fill problems. The detailed compatibility list and included guard add practical value for home repairs.
Commercial Ice Machine Valve – FCD180G Solenoid Fill Valve
If you need ice maker replacement valves for a commercial or countertop machine, this FCD180G-style inlet valve is aimed at 110V-127V AC systems and select Whirlpool, GE, Kenmore, and VEVOR ice makers. It is intended as a reference replacement, so checking your original valve’s connector, bracket, and port layout is important before ordering.
Best For: Commercial or countertop ice machines that use an FCD180G-style 110V-127V valve.
Pros:
- Designed for 110V-127V AC 50/60Hz ice maker systems
- Includes threaded inlet connection, outlet tube port, and dual wire terminals
- Has a built-in inlet filter screen and metal mounting bracket
- May help resolve no-fill, slow-fill, or leaking valve issues
Cons:
- Compatibility depends on matching the original valve configuration closely
- Not for 220V systems
This is the most specialized option in the group, better suited to machines that already use an FCD180G-style setup than to broad refrigerator replacement jobs. If the voltage and physical layout line up, it offers a targeted fix for fill-related ice machine problems.
GE/Hotpoint/Kenmore Compatible – WR57X10033 Ice Maker Inlet Valve
If you need one of the more common ice maker replacement valves for a GE, Hotpoint, or Kenmore refrigerator, this WR57X10033-compatible inlet valve is built to restore steady water flow to the icemaker. It uses a 1/4-inch inlet fitting and quick-connect outlet, and it’s designed to address issues like no water output, leakage, and inlet freezing.
Best For: Homeowners replacing a worn GE/Hotpoint/Kenmore icemaker valve with a broadly cross-compatible part.
Pros:
- Compatible with many related part numbers, including WR57X0093 and AP3189335.
- Single-outlet design with 1/4-inch compression inlet and quick-connect outlet.
- Targets common failures like leaking, no ice, and water inlet freezing.
- Includes a 365-day return and exchange policy.
Cons:
- Compatibility depends on matching your refrigerator model and original part number.
- Installation calls for basic tools and shutting off power first.
- Existing plastic hose may need the retaining nut cut off for the new quick coupling.
This is a practical replacement if you want a valve with broad part-number coverage and straightforward connections. Just verify fit carefully before ordering, since the listing spans many similar variants.
Electrolux/Frigidaire Match – 242252603 Ice Maker Water Valve
This 242252603 option is aimed at buyers comparing ice maker replacement valves for Electrolux, Frigidaire, and Kenmore refrigerators. It’s designed to replace a damaged valve, restore consistent water flow, and help solve ice-making problems, poor flow, and leakage.
Best For: Replacing a compatible Frigidaire, Electrolux, or Kenmore icemaker valve with a metal-bodied part.
Pros:
- Rated 120V, 50/60Hz, 35W with 1/4-inch compression inlet and push-connect outlet.
- Compatible with part numbers like AP5671756, PS7784017, and 241803701.
- Built from metal materials for long-lasting use.
- Intended to address ice-making issues, poor flow, and leakage.
Cons:
- You need to confirm your refrigerator model and original part number before buying.
- Installation requires disconnecting both power and water supply.
- Fit is limited to compatible refrigerator families and matching part numbers.
If your fridge uses the 242252603 family, this is a straightforward replacement to consider. The metal construction and standard connection sizes make it appealing, but fit verification is essential.
Whirlpool Family Upgrade – WPW10498976 Ice Maker Solenoid Valve
For shoppers looking at ice maker replacement valves in Whirlpool-family refrigerators, this WPW10498976 unit is built to regulate water flow smoothly to the icemaker. It uses a 1/4-inch male compression inlet and push-on outlet, and it’s described as a replacement for several related Whirlpool, Kenmore, and Maytag part numbers.
Best For: Replacing a Whirlpool, Kenmore, or Maytag icemaker water valve with a widely cross-referenced part.
Pros:
- Compatible with part numbers including W10498976, W10420082, PS11755667, and AP6022334.
- 120V, 35W, 60Hz design with standard 1/4-inch inlet and outlet sizes.
- Built from enhanced materials for stability and leak resistance.
- Targets water seepage and inconsistent flow to the ice maker.
Cons:
- Compatibility spans many model series, so exact matching is important.
- The listing includes a very long model fitment list, which can make checking slower.
- Material construction includes plastic and rubber rather than metal.
This is a solid pick when you need a replacement with broad Whirlpool-family coverage and standard hookups. As always, confirm the original part number before ordering to avoid a mismatch.
Reliable Fit Option – 242252603 Ice Maker Valve for Frigidaire/Kenmore
If you’re replacing ice maker replacement valves, this 242252603 water inlet valve is built for Frigidaire, Crosley, Electrolux, Gibson, and Kenmore refrigerators with a focus on stable water flow and a secure seal. It’s a practical choice when you’re dealing with weak ice production, leaks, or odd noises from the water valve area.
Best For: Owners of compatible Frigidaire or Kenmore refrigerators who want a straightforward replacement with bracket, push-fit connection, and broad part-number cross-compatibility.
Pros:
- Compatible with multiple part numbers, including 241803701, 218475600, 218720400, and 240380301
- Uses 1/4″ compression inlet and 1/4″ push-connect outlet for simple installation
- Made from corrosion-resistant metal and high-strength plastic for humid fridge environments
- Includes mounting bracket and is tested for fit and water-flow stability
Cons:
- Compatibility is model-specific, so the refrigerator model must be checked carefully
- Designed for single water inlet setups
This is a solid replacement valve if your goal is to restore normal ice production with minimal fuss. The sealing design, included bracket, and broad compatibility make it a dependable repair part rather than a universal fix.
Upgraded Seal Design – 242252603 Ice Maker Solenoid Valve
This upgraded 242252603 option is a strong pick if you’re shopping for ice maker replacement valves to fix low water flow, leaks, or irregular ice output on compatible Frigidaire and Kenmore refrigerators. Its push-fit connector design and revised sealing approach are aimed at reducing wear and improving leak resistance.
Best For: Shoppers who want an upgraded replacement valve with a more secure connector design and a 2-year warranty.
Pros:
- Upgraded push-fit connector is designed to reduce wear and help prevent leaks
- Compatible with part numbers like 241803701, 241803703, 218475600, 240519601, and AP5671756
- Built from corrosion-resistant metals and engineering plastics for long service life
- Backed by a 2-year manufacturer warranty
Cons:
- Not a replacement for several similar-looking parts, including WPW10498976 and WR57X10032
- Requires careful model matching before purchase
- Only intended for refrigerators with a single water inlet
Overall, this is the most feature-focused valve in the group, especially if leak prevention and connector durability matter to you. Just make sure your model and part number line up before ordering.
Model-Match Replacement – 242252603 Valve for Frigidaire/Electrolux
When you’re comparing ice maker replacement valves, this 242252603 inlet valve stands out for its long compatibility list and standard 120V, 35W setup. It’s intended to solve weak ice output, leaking, and water-supply issues on compatible Frigidaire, Kenmore, and Electrolux refrigerators.
Best For: Users who want a model-specific replacement with broad part-number support and a simple compression/push-in connection setup.
Pros:
- Supports many replacement numbers, including AP5671756, 241803703, 241803701, and 240380301
- Compatible with numerous Frigidaire FFHI18 series model variants
- Uses 1/4-inch compression inlet and 1/4-inch push-in connection socket
- One-year warranty and improved sealing process for leak prevention
Cons:
- Material listing is less robust than some alternatives, with plastic noted in the details
- Compatibility still depends on exact refrigerator model
- Many similar valves look alike, so part matching is important
This version is a practical replacement when you need a known-compatible valve with common connection types and a clear part-number match. It’s a good fit for buyers who prefer to verify model numbers before they buy.
How We Picked the Best Ice Maker Replacement Valves
We prioritized exact model compatibility, common refrigerator brand coverage, connector size, voltage match, and whether each valve is designed as a direct replacement. We also considered durability details like solenoid design, included guards, and whether the part is suited to household or commercial use.
Quick Comparison: What Matters Most
The fastest way to narrow the field is by matching the OEM part number first, then checking your refrigerator brand and water inlet style. After that, confirm electrical specs, inlet/outlet configuration, and whether the valve is for an ice maker only or a full water inlet assembly.
Key Buying Factors for Ice Maker Replacement Valves
Compatibility and OEM Cross-Reference
Most purchase mistakes happen when a valve looks close but does not match the original part number. Cross-reference the manufacturer number on the old valve, owner’s manual, or parts diagram before buying.
Voltage and Application
Ice Maker Replacement Valves are not universal. Household refrigerators and commercial ice makers may use different voltages, flow requirements, and mounting styles. Make sure the replacement is rated for your machine’s power and intended use.
Water Line and Fitting Size
Check inlet fitting size, outlet tubing type, and whether your setup uses a guard or bracket. A correct valve still won’t install cleanly if the connections or mounting points differ.
Flow Control and Leak Prevention
A quality valve should open consistently and close fully to prevent overfilling, low ice output, or slow leaks. If your old valve caused flooding or weak cubes, look for a direct-fit replacement with solid sealing performance.
Who Should Buy Which Ice Maker Replacement Valves?
Buyers replacing a failed refrigerator valve should choose the closest OEM-matched part number for the safest fit. If you’re servicing a common Frigidaire, GE, Whirlpool, Kenmore, or Maytag machine, pick a model-specific valve rather than a generic option. For commercial units, use a valve explicitly rated for that application and voltage. If you’re unsure, confirm the part number and connector layout before ordering to avoid returns and repeat repairs.
In short, the best choice is the one that matches your appliance exactly, installs cleanly, and restores dependable water flow to the ice maker.